INCH-POUND
MIL-DTL-45500E
18 December 1996
SUPERSEDING
MIL-G-45500D
30 July 1994
DETAIL SPECIFICATION
GUN, AUTOMATIC, 20MM,
GENERAL SPECIFICATION FOR
This specification is approved for use by all Departments and
Agencies of the Department of Defense.
1.
SCOPE
1.1 Scope. This specification covers the general requirements
for multi-barrel, electrically fired, 20 millimeter (mm) automatic
guns. Additional requirements for specific models of the 20mm
automatic gun are on specification sheets which are included as a
part of this specification.
2.
APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are
specified in sections 3, 4, and 5 of this specification. This
section does not include documents cited in other sections of
this specification or recommended for additional information or
as examples. While every effort has been made to ensure the
completeness of this list, document users are cautioned that they
must meet all requirements documents cited in sections 3, 4, and
5 of this specification, whether or not they are listed.
Beneficial comments (recommendations, additions,
deletions)
and
any
pertinent data which may be of use in improving this document, should be
addressed to: Commander, U.S. Army ARDEC, ATTN: AMSTA-AR-EDE-S, Picatinny
Arsenal, New Jersey 07806-5000 by using the Standardization Document
Improvement Proposal (DD Form 1426) appearing at the end of this document or
by letter.
AMSC N/A
FSC 1005
DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business