INCH-POUND
MIL-S-45921A
22 June 1993
SUPERSEDING
MIL-S-45921
6 January 1971
MILITARY
Specification
STOCK, GUN, SHOULDER: ASSEMBLY W/O BUTT PLATE,
FIBERGLASS REINFORCED, PLASTIC (PREMIX)
(FOR RIFLE, 7.62MM: M14)
This specification is approved for use by all Departments
and Agencies of the Department of Defense.
1.
SCOPE.
1.1 Scope.
This specification covers one type of fiberglass
reinforced plastic (premix) stock assembly for the M14 rifle. The
stock assembly is furnished without the butt plate but with the
slotted machine screw, square plain nut, and nut retainer required
for assembly of the butt plate (See 6.1).
2.
APPLICABLE DOCUMENTS.
2.1 Government
documents.
2.1.1 Specifications, standards and handbooks. The
following specifications, standards and handbooks form a part of
this document to the extent specified herein. Unless
otherwise specified, the issue of these documents shall be those
listed in the issue of the Department of Defense Index of
Specifications and Standards (DODISS) and supplement thereto,
cited in the solicitation (See 6.2).
SPECIFICATIONS
MILITARY
MIL-P-116
-preservation, Methods of
MIL-W-13855
-Weapons: Small Arms and Aircraft
Armament Subsystems, General
Specification for
Beneficial comments (recommendations, additions, deletions) and any
pertinent data which may be of use in improving this document, should be
addressed to: Commander, U.S. Army ARDEC, ATTN: SMCAR-BAC-S, Picatinny
Arsenal, New Jersey 07806-5000 by using the Standardization Document
Improvement Proposal (DD Form 1426) appearing at the end of this document
or by letter.
FSC 1005
AMSC N/A
Approvcd for pubIic rclease distribution is unlimited.
DISTRIBUTION STATEMENT A.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business