MIL-DTL-71186A
8440220
Gage, Plug
8440920
Cylinder, Pressure
8443572
Computer, Rate of Fire
8443915
Gage, Headspace (Min)
8443949
Gage, Headspace (Max)
8440878
Gage, Fixture, Dial Indicating
8443733
Gage, Plug, Straightness
8443957
Gage, Location
8448202
Gage, Bore Straightness
8448510
Bolt
12991850
Barrel and Barrel Extension Assembly
12972652
Marking, Lower Receiver Model M4A1
10533839
Cartridge, 5.56MM, Test, High Pressure, M197
11837922
Gage, indicating
11837943
Targeting and Accuracy Test Firing Fixture
11837944
Barrel and Bolt Proof Testing Fixture
11837945
Function Firing Test Stand
11838443
Gage, Flush Pin
13004788
Bolt Carrier Assembly
(Copies of these drawings maybe requested online at pica.drawing.request@conus.army.mil or
from US Army ARDEC, ATTN: RDAR-EIS-PE, Picatinny Arsenal, NJ 07806-5000.)
2.3 Non-government publications. The following documents form a part of this document
to the extent specified herein. Unless otherwise specified, the issues of these documents are
those cited in the solicitation or contract.
AMERICAN SOCIETY FOR TESTING AND MATERIALS INTERNATIONAL
(ASTM International)
ASTM E1444
-
Standard Practice for Magnetic Particle
Examination
(Copies of ASTM standards may be ordered online at https://www.astm.org/ or from the ASTM
International, 100 Barr Harbor Drive, Conshohocken, PA 19428-2959.)
SPORTING ARMS AND AMMUNITION MANUFACTURERS' INSTITUTE
STANDARD (SAAMI)
ANSI/SAAMI-Z299.4
-
Voluntary Industry Performance Standards for
Pressure and Velocity of Centerfire Weapon
Sporting Ammunition for the Use of Commercial
Manufacturers
(Copies of SAAMI standards may be ordered online at https://www.saami.org/.)
3
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business