MIL-B-70511B (AR)
Quality conformance inspection.
4.3
4.3.1
Inspection lot.
4.3.1.1 M2 Bolt. The number of M2 Bolts in an inspection
lot shall be 800 or one month's production, whichever is smaller.
4.3.2 Examination. The examinations listed in this
specification and component part quality assurance provisions
shall be performed on inspection lots as defined in 4.3.1 of this
specification.
Samplinq plans. Sampling plans are incorporated in
this specification either by reference to appropriate military
standards or by stipulating other specific acceptance criteria.
In cases where sampling is specified in accordance with MIL-STD-
105, the contractor may request permission from the procuring
activity to use an equivalent continuous sampling plan form MIL-
STD-1235.
b. Examination for defects. Each M2 Bolt in an
inspection lot shall be subjected to the inspections listed in
4.3.2.1 for which a 100% inspection is specified. M2 Bolts which
fail to meet the specified requirements shall be rejected and
removed from the lot. A random sample of M2 Bolts shall be
selected from the inspection lot in accordance with Level II of
MIL-STD-105 for the inspections listed in 4.3.2.1 for which an
AQL is specified. Acceptance/Rejection of the lot shall be based
on the specified AQL.
8
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business