METRIC
MIL-DTL-71026A (AR)
06 June 2000
SUPERSEDING
MIL-M-71026
11 FEBRUARY 1993
MILITARY SPECIFICATION
MAGAZINE, CARTRIDGE, SOFT PACK,
REUSABLE, M249, 5.56MM MACHINE GUN
(METRIC) GENERAL SPECIFICATION FOR
This specification is approved for use by the U.S. Army
Armament Research , Development and Engineering Center and is
available for use by all Departments and Agencies of the
Department of Defense.
1.
SCOPE
1.1 Scope. This specification covers the Magazine,
Cartridge, Soft Pack, Reusable, M249, 5.56mm Machine Gun,
hereafter referred to as the magazine (see 6.1).
2.
APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are
specified in sections 3 and 4 of this specification. This
section does not include documents in other sections of this
specification or recommended for additional information or as
examples. While every effort has been made to ensure the
completeness of this list, document users are cautioned that they
must meet all requirements documents cited in sections 3 and 4 of
this specification, whether or not they are listed.
Beneficial comments (recommendations, conditions, deletions) and any pertinent data which
may be of use in improving this document, should be addressed to: Commander, U.S. Army
ARDEC, ATTN: AMSTA-AR-QAW-E , Picatinny Arsenal, New Jersey 07806-5000 by using the
Standardization Document Improvement Proposal (DD Form 1426) appearing at the end of this
document or by letter.
AMSC N/A
FSC 1005
DISTRIBUTION STATEMENT A.
Approved for public release; distribution is unlimited.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business