MIL-S-45921A(AR)
3.3 Markinq. Markings shall be in accordance with the
applicable drawing and marking provisions of MIL-W-13855.
Workmanship shall be in accordance-with
3.4 Workmanship.
the workmanship requirements of MIL-W-13855.
4.
QUALITY ASSURANCE PROVISIONS
4.1 Responsibility for inspection. Unless otherwise
specified in the contract or purchase order, the contractor is
responsible for the performance of all inspection requirements
(examinations and tests) as specified herein. Except as
otherwise specified in the contract or purchase order, the
contractor may utilize his own or any other facilities suitable
for the performance of the inspection requirements specified
herein, unless disapproved by the Government. The Government
reserves the right to perform any of the inspections set forth in
the specification where such inspections are deemed necessary to
ensure supplies and services conform to prescribed requirements.
4.1.1 Responsibility for compliance. All items shall meet
all requirements of Sections 3 and 5. The inspection set forth in
this specification shall become a part of the contractor's overall
inspection system or quality program. The absence of any
inspection requirements in the specification shall not relieve the
contractor of the responsibility of ensuring that all products
or supplies submitted to the Government for acceptance comply with
all requirements of the contract.
Sampling inspection, as part
of manufacturing operations, is an acceptable practice to
ascertain conformance to requirements, however, this does not
authorize submission of known defective material, either indicated
or actual, nor does it commit the Government to accept defective
material.
Quality
4.2 Quality assurance terms and definitions.
assurance terms and definitions used herein are in accordance with
MIL-STD-109 .
4.3 Classification of inspection. The inspection
requirements specified herein are classified as follows:
a.
First article inspection (see 4.4).
b.
Quality conformance inspection (see 4.5).
A first article sample shall
4.4 First article inspection.
be selected from early production and pilot pack submitted for
inspection in accordance with contract-requirements (see 6.1).
The sample shall be representative of production processes to be
used during quantity production. The first article inspection
sample shall be inspected as specified in 4.5.3.2.
6
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business