MIL-DTL-45500E
teeth, and the bolt shaft assemblies shall be examined to assure
that lubricant (see 3.8) has been applied as required by final
assembly drawing.
4.5.2.2.3 Torque of housing bolts. The bolts holding the two
housing halves together shall be manually examined for torque
specified on the applicable drawing using a torque wrench (see 3.7).
4.5.2.3 Historical records. When specified (see 6.2),
upon completion of all examinations and tests, the required data
shall be recorded on DD Form 829, Historical Record for
Aeronautical Equipment and DD form 829-1, Historical Record -
Technical Instructions Compliance Record, and shall be examined
to assure that all pertinent data has been entered. One each of
the completed forms shall be provided with each gun assembly.
4.5.3
Testing.
4.5.3.1 Failure data. Unless otherwise specified herein,
all tests shall be conducted on a complete gun. If test
requirements cited herein are not met, acceptance of the gun
shall be deferred and the contractor shall accomplish as
applicable, the following actions:
a. Conduct a failure analysis study performing a dimensional
physical and visual examination of the components which are
suspected to be the cause of failure or malfunction.
b. Evaluate and correct the applicable production processes
and procedures to prevent recurrence of the same defect(s) in
future production.
c. Examine guns, partially assembled guns, and components
(including components and subassemblies at in-process or final
assembly) to insure that material containing the same defect is
purged from the inventory and is not presented to the Government
for acceptance.
d. Submit the results of the failure analysis and the
corrective actions taken to the Government for review and
approval prior to submitting a reconditioned lot or reconditioned
gun for retest.
4.5.3.2 Firing pin protrusion and continuity and
head space
testing. Each gun shall be tested for firing pin
protrusion and
continuity (see 3.4.1) and head space (see 3.4.2)
using the test
methods specified in 4.6.1 and 4.6.2. Failure of
any gun to pass
these requirements shall be cause for rejection.
10
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business