MIL-DTL-45500E
4.5.2.1 Component parts and concurrent repair parts.
Examination of component parts and concurrent repair parts shall
be as specified in the contract (see 6.2). The contractor's
examination of these parts shall be prior to assembly into the
end item or acceptance as repair parts.
4.5.2.2 Guns. Visually and manually examine each gun to
determine conformance with the following requirements. Each step
in the examination shall include a visual examination for proper
cleaning and presence of the specified protective coating and to
determine the general quality, completeness of manufacture,
assembly, clarity and legibility of markings and workmanship.
The examination provisions shall be applied at the earliest
practical point in manufacture at which it is feasible to inspect
for acceptance without risk of change in the characteristic by
subsequent operations. Reinspections of these characteristics on
the completed product is not required provided assurance exists
that the characteristic has not been changed, degraded or damaged
by subsequent manufacturing, assembly or handling and that
adequate inspection records are maintained. Guns failing to meet
the requirements shall be rejected.
Part or assembly
Reference paragraph
Materials, construction and design
3.3
Barrels
3.3.1, 3.3.1.1
Barrel clamps
3.3.2
Breech bolt assemblies
3.3.3
Cams, locking and unlocking
3.3.4
Clearing sector assembly
3.3.5 (except M197 & M197E1)
End plate
3.3.6
Firing contact assembly
3.3.7
Guide bar
3.3.8
Housing assembly
3.3.9
Housing cover assembly
3.3.10 (except M197 & M197E1)
Indexing pin assembly
3.3.11
Recoil adapter
3.3.12
Bearing retainer assembly or
3.3.13
Automatic gun recoil mechanism
Rotor assembly
3.3.14
4.5.2.2.1 Markings. All markings (see 3.9) required by
final assembly drawings shall be visually examined for clarity
and legibility. The identification plate shall be examined for
compliance with the applicable drawings, secure assembly, and
serial number.
4.5.2.2.2 Lubrication. The housing cam walls, rotor
tracks rear surface of front locking wells, unlocking cams, gear
9
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business