MIL-DTL-45500E
4.5.3.3 High-pressure resistance, functioning, targeting
and accuracy testing. Each gun shall be tested for high-pressure
resistance (see 3.4.3), functioning (see 3.4.4), targeting and
accuracy (see 3.4.5) using the test methods specified in 4.6.3,
4.6.4 and 4.6.5 respectively. Guns failing to meet these
requirements shall be cause for rejection.
4.5.3.4
Endurance testing (see 6.2).
4.5.3.4.1 Lot size. The initial endurance test lot size
shall consist of the initial month's production; subsequent
endurance test lots shall consist of 100 guns. The initial test
gun shall be taken from the first month's production. When five
successive lots meet the requirements, the endurance test lot
size shall be increased to 200 guns.
4.5.3.4.2 Procedure. One gun selected at random from each
endurance lot shall be tested for endurance (see 3.4.6 and
applicable specification sheet) using the test specified in
4.6.6. If the endurance test requirements are not met, the
represented lot shall be rejected.
4.5.3.5
Interchangeability testing (see 6.2).
4.5.3.5.1
Intra-plant.
4.5.3.5.1.1 Guns. A sample of three guns, selected at
random from the first ten guns of each month's production shall
be tested for interchangeability (see 3.6 and applicable
specification sheet) using the test method specified in
4.6.7.1.1. Guns taken for interchangeability testing shall have
met all other inspection requirements specified herein and in the
applicable specification sheet. The three guns shall be
inspected for compliance with firing pin protrusion, head space,
functioning, and targeting and accuracy requirements after
interchange of parts using the test methods specified in 4.6.1,
4.6.2, 4.6.4 and 4.6.5 respectively. Failure of inter-
changeability shall be cause for rejection of the represented
lot. Sample size and test methods shall be the same for retest.
4.5.3.5.1.2 Concurrent repair parts. At least two parts
from each inspection lot shall be subjected to the test method
specified in 4.6.7.1.2. Failure of any part to meet the
requirements shall be cause for rejection of the represented lot.
Parts subject to reconditioning and further test shall become a
reconditioned lot and a sample of double the number of parts used
in the original test shall be tested from each reconditioned lot
using the test method specified in 4.6.7.1.2.
11
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business