MIL-DTL-45500E
4.6.7.2.1 Guns. Guns subjected to the inter-plant
interchangeability test shall be given a preliminary firing test of
12 cartridges, 20mm, Target Practice, M55A2 to assure proper
operation before parts are interchanged. Parts shall be
disassembled from the guns and identified as to manufacture.
Disassembled parts shall be mixed and guns reassembled by random
selection of parts. After assembly, the guns shall be tested for
functioning, targeting and accuracy requirements using the tests
specified in 4.6.4 and 4.6.5. Before guns are returned to the
contractors, the original parts shall be reassembled to their
respective weapons and given a functioning test using a belt of 50
cartridges, 20mm, Dummy, M51 series.
4.6.7.2.2 Repair parts. When required by contract (see
6.2), concurrently manufactured repair parts submitted for tests
shall be assembled in the guns previously tested in 4.6.7.1.1
Guns shall be assembled using different combinations of parts to
insure parts are interchangeable. After assembly, the guns shall
be tested for functioning, targeting and accuracy requirements
specified in 4.6.4 and 4.6.5.
5.
PACKAGING
5.1 Packaging. For acquisition purposes, the packaging
requirements shall be as specified in the contract or purchase
order (see 6.2). When actual packaging of materiel is to be
performed by DoD personnel, these personnel need to contact the
responsible packaging activity to ascertain requisite packaging
requirements. Packaging requirements are maintained by the
Inventory Control Point's packaging activity within the Military
Department or Defense Agency, or within the Military Department's
System Command. Packaging data retrieval is available from the
managing Military Department's or Defense Agency's automated
packaging files, CD-ROM products, or by contacting the
responsible packaging activity.
6. NOTES
(This section contains information of a general or
explanatory nature which may be helpful, but is not mandatory.)
6.1 Intended use. The 20mm automatic gun is intended for
use on fixed and rotary wing aircraft and for use on ground to
air anti-aircraft weapon systems.
6.2 Acquisition requirements.
Acquisition documents should
specify the following:
a.
Title, number and date of this specification.
17
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business